dPict Imaging DP-810 Video Encoder Module

The DP-810 is a low-power Linux-based system module that provides video encoding and transmission of 4K video. It supports the standard HDMI interface or allows for the direct connection to the Data I/O connector on Sony 4K series block cameras. Video can be encoded to Ethernet or WiFi in video resolutions up to 4K30p. The DP-810 also provides physical power, USB, and serial/VISCA interfaces for complete camera control.

DP-810 Features

  • HDMI Video Input Support up to 4K30p
  • Supports Direct Connection to Sony Block Cameras
  • 4K HEVC (H.265) and H.264 Video Compression
  • 10/100/1000 Ethernet
  • RTSP with Authentication
  • Serial/VISCA Camera Control Over IP
  • HDMI Preview Output
  • Integrated 802.11ac WiFi
  • Micro-SD Card Interface for Recording
  • On-Board Frame Buffer for Robust Video Transmission
  • Power, USB, and Serial/VISCA Interface to Camera
  • ONVIF Profile S Support
  • HTTP Web Setup and Configuration Utility
  • Web Services API for OEM Configuration
  • Optional Support for Sony Alpha Cameras
  • Optional Camera Integration Kit
  • DP-810 Spec Sheet


    DP-810 Description

    Linux-Based System

    The DP-810 is a low-power Linux-based embedded platform with a powerful Qualcomm Snapdragon processor that incorporates a 2.2 GHz 8-core 64-bit ARM Cortex A53 processor, an AI-capable video processor, memory and peripherals.

    Real-Time 4K Video Encoding

    The DP-810 supports H.265/H.264 video encoding at resolutions up to 4K30p. Encoded video can be transmitted over Ethernet or wireless interfaces.

    Full Sony Block Camera Integration

    The DP-810 solution offers complete module and camera control for custom OEM integration. A 30-pin micro-coax cable connects to the Sony block camera for video data transfer and camera communication. The DP-810 provides power to the Sony block and also supports the transfer of Sony VISCA commands through Ethernet or an optional serial cable.

    Configuration Tools

    Configuration and adjustments of the DP-810 and connected block camera can be done remotely using provided HTTP/HTTPS web utilities. For OEMs, a web service API is included with sample code for integrating the DP-810 into OEM installations. ONVIF support is also included.

    Camera Integration

    The DP-810 system comes with two I/O boards for Ethernet, HDMI video out, power and communication. An I/O board bracket sled is available to provide for secure mouting in any system.





    Video Processing

  • Supports HDMI Inputs up to 4K30p
  • Real-Time H.265/H.264 Video Encoding
  • Native Support for Sony Block Cameras
  • HDMI Video Output
  • Sony Block Support

  • FCB-ES8230
  • FCB-ER8300
  • FCB-ER8530
  • FCB-ER8550
  • FCB-EW9500
  • System

  • 10/100/1000 Ethernet
  • Integrated 802.11ac WiFi
  • 2 GB System Memory
  • 16 GB Flash Memory
  • Bluetooth 4.2
  • Micro-SD Card Interface
  • VISCA Serial Interface
  • Micro USB Interface
  • Physical and Environmental

  • 57mm (height) x 54mm (width)
  • Operating temperature: 0° C to 70° C
  • Relative humidity: 5% up to 95% non-condensing
  • KEL 30-pin IDC connector (Sony interface)
  • RJ45 Connector (Ethernet/VISCA)
  • HDMI Connector (Video Out)
  • Micro SD Card Socket (Recording)
  • 2-Pin Phoenix Connector (Power)
  • Molex 503148 Connector (Serial/VISCA)
  • Micro USB (Camera Firmware)
  • Ordering Information

  • DP-810: 20034-001
  • More Information